Mercedes-Benz 2005 E 320 CDI - Manual (Page 260)

258
Controls in detail
Loading
̈ Pull release handle 1.
The seat cushion automatically springs
upward slightly.
1 Seat cushion
2 Seat backrest
̈ Grip the back of seat cushion 1 and
fold forward.
̈ Push the rear seat head restraints all
the way in.
̈ Pull the handle in the trunk.
The seat backrest is released and the
head restraints fold back.
̈ Fold the seat backrest forward.
Returning seat backrest to original po-
sition
1 Seat cushion
2 Seat backrest
̈ Swing seat backrest 2 to the rear until
it engages.
̈ Swing seat cushion 1 to the rear and
press the center front of the cushion
until it audibly engages.
i
If tall persons have occupied the driv-
er’s and front passenger seats, it may
be necessary to move these seats for-
ward slightly in order to fold the rear
seat backrests forward.
i
If the rear center seat is to be occupied
while driving, it may be necessary to
fold the seat belt buckle up again.
!
Make sure the head restraints fit all the
way into the seat cushion pockets. This
will prevent the backrests from being
damaged during loading.