Mercedes-Benz 2005 E 320 CDI - Manual (Page 348)

346
Operation
Maintenance
Setting the date for special works
You can enter appointments for exhaust
gas analysis and general inspection using
the maintenance system.
̈ Switch on the ignition ( ୴ page 33).
The standard display of the control sys-
tem appears (
୴ page 145).
̈ Press button k or j on the mul-
tifunction steering wheel until the
maintenance indicator appears in the
multifunction display.
̈ Press the reset button ( ୴ page 24) for
about five seconds.
The Service menu appears in the multi-
function display.
̈ Select the Addit. Work menu with the
+ or - button.
̈ Press the ÿ button.
The service indicator now displays the
Addit. Work menu.
̈ Select the Exh.-gas analysis or
General inspection menu with the
+ or - button.
̈ Press the ÿ button.
The service indicator now displays the
Next due date menu.
̈ Select the Month a nd Year with the
+ or - button.
̈ Press button k or j on the mul-
tifunction steering wheel to set the
month and year.
̈ Select Confirm with the + or -
button.
̈ Press the ÿ button.
The new date is set.