Mercedes-Benz 2005 E 320 CDI - Manual (Page 422)

420
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
1 Bulb socket for high beam head-
lamp/high beam flasher bulb
2 Bulb socket for parking and standing
lamp bulb
3 Housing cover for low
beam/Bi-Xenon* headlamp
4 Bulb socket for turn signal lamp bulb
5 Electrical connector for high beam
headlamp/high beam flasher bulb
6 Bulb socket for parking and standing
lamp bulb
7 Electrical connector for low beam
headlamp bulb (halogen headlamps
only)
Before you start to replace a bulb for a
front lamp, do the following first:
̈ Turn the exterior lamp switch to
position
M ( ୴ page 133).
̈ Open the hood ( ୴ page 303) (except
for side marker lamps).
Warning!
G
Do not remove the cover 3 for the Bi-Xe-
non* headlamp. Because of high voltage in
Xenon* lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.