Mercedes-Benz 2005 E 320 CDI - Manual (Page 37)

35
Getting started
Unlocking
SmartKey with KEYLESS-GO*
Pressing the KEYLESS-GO start/stop but-
ton on the gear selector lever corresponds
to turning the SmartKey to the various
starter switch positions.
If you firmly depress the brake pedal dur-
ing pressing KEYLESS-GO start/stop but-
ton, the engine starts automatically.
KEYLESS-GO start/stop button
1 USA only
2 Canada only
The SmartKey with KEYLESS-GO must be
located in the vehicle.
̈ Make sure the gear selector lever is set
to P.
̈ Do not depress the brake pedal.
Position 0
Before you press the KEYLESS-GO start/
stop button, the vehicle's on-board elec-
tronics have status 0 (as with SmartKey re-
moved).
Position 1
̈ Press KEYLESS-GO start/stop button
once.
This supplies power to some electrical
consumers, such as seat adjustment.
i
The function of the SmartKey overrules
the KEYLESS-GO function.
i
If you now press the KEYLESS-GO
start/stop button
ț once again, the ignition (position 2)
is switched on.
ț twice, the power supply is again
switched off.