Mercedes-Benz 2005 E 320 CDI - Manual (Page 164)

162
Controls in detail
Control system
Lighting submenu
Access the Lighting submenu via the Set-
tings menu. Use the Lighting submenu
to change the lamp and lighting settings on
your vehicle. The following functions are
available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
button
æ or ç to the Lighting
submenu.
̈ Press button j or k repeatedly
until you see Lamp circuit headlamp in
the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to select
manual operation ( manual ) or daytime
running lamp mode ( constant ) activat-
ed.
With daytime running lamp mode activated
and the exterior lamp switch at
position
M or U the low beam head-
lamps are switched on when the engine is
running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
ț Parking lamps
ț Tail lamps
ț License plate lamps
ț Side marker lamps
For more information on the daytime run-
ning lamp mode, see “Lighting”
(
୴ page 133).
Function Page
Set daytime running lamp mode
(USA only) 162
Setting locator lighting 163
Setting night security illumina-
tion 164
Setting interior lighting delayed
shut-off 165
Setting ambient lighting 165
i
This function is not available in coun-
tries where the daytime running lamp
mode is mandatory and therefore in a
constant mode.