MITSUBISHI ELECTRIC CP800DW - Manual (Page 7)

6
FEATURES & FUNCTIONS
INSIDE OF PRINTING UNIT
1 Ink cassette
compartment
2 Ink cassette locking lever
3 Print paper fixing lever
4 Paper sending control
3 3 3 3 3
PRINT PAPER FIXING LEVER
Use this lever when inserting print paper.
4 4 4 4 4
PAPER SENDING CONTROL
Turn this control clockwise to rewind the print paper.
1 1 1 1 1
INK CASSETTE COMPARTMENT
Load the ink cassette here. Insert the cassette gently until
it snaps into place.
2 2 2 2 2
INK CASSETTE LOCKING LEVER
Push this lever to take the ink cassette out.
REAR PANEL
SCREW
1 2 3 4 5 6 7 8
AC LINE
1 2 3 4 5 6 7 8
DIRECT SNAP
ACK
ON PARALLEL
OFF SCSI
ON
OFF
PARALLEL
ID No.
SCSI
2
4
3
5
1
Store the printing unit
fixing screw here.
1 1 1 1 1
SCSI PORT
Used to connect this unit to a SCSI device such as per-
sonal computers. See page 9.
2 2 2 2 2
SCSI ID SWITCH
Used to set the SCSI ID number of the connected device.
See page 9.
3 3 3 3 3
PARALLEL DATA PORT
Compatible parallel interface for Centronics ® .
For pin connections see the table on pages 7-8.
4 4 4 4 4
POWER SOCKET (AC LINE)
Connects to the provided power cord. Insert the cord
firmly.
5 5 5 5 5
MODE SWITCHES
Used to set the time of the acknowledge signal, selection
between PARALLEL and SCSI of the connected device,
and direct snap setting. See page 10.
Centronics ® is a registered trademark of Centronics Data
Corporation.