MITSUBISHI ELECTRIC CP800DW - Manual (Page 16)

15
PREPARATION
FEATURES
PRECAUTIONS
CONNECTIONS
OTHERS
TROUBLE- SHOOTING
The installation of print paper and ink cassette is completed.
2 2 2 2 2
INSERT THE PRINTING UNIT
1 1 1 1 1
Push the printing unit until it is locked into place.
2 2 2 2 2
After plugging the power cord, press POWER button on the front
panel.
3 3 3 3 3
Press ON LINE button to put out a lamp on the button.
4 4 4 4 4
Press PAPER FEED & CUT button.
• The print paper is automatically cut after feeding about 10cm.
5 5 5 5 5
Repeat the above step 4 4 4 4 4
.
• Fingerprints and dust can be removed by feeding the print paper. The printing unit
is initialized.
6 6 6 6 6
Press ON LINE button to turn on the lamp on the button.
NOTE
Do not feed the print paper more than 2 times. Doing so will not allow the number of
prints indicated on page 11 to be printed.