Before operation, Paper sheet set, Removing screw and protective cushion – MITSUBISHI ELECTRIC CP800DW User Manual
Page 12: 2print paper and ink sheet, 2removing the fixed screw on the printing unit
11
PREPARATION
FEATURES
PRECAUTIONS
CONNECTIONS
OTHERS
TROUBLE-
SHOOTING
Before printing,
1. Remove the fixed screw on the printing unit and the protective cushion. (pages 11-12)
2. Insert print paper to this unit. (pages 12-13)
3. Install the ink cassette to this unit. (pages 14-15)
BEFORE OPERATION
PAPER SHEET SET
The following types of paper sheet sets are available.
Use our original consumable. We can not guarantee the failure of using others.
2
2
2
2
2
Print paper and ink sheet
Product name
Print paper size
No. of prints
Usage
CK800FL4P
L
60
Surface-laminated color print
CK800FS4P
S
100
Surface-laminated color print
REMOVING SCREW AND PROTECTIVE CUSHION
A protective cushion is inserted inside this unit. And the printing unit is fixed with a screw,
therefore, remove them before using this unit.
2
2
2
2
2
Removing the fixed screw on the printing unit
There is a fixed screw at the bottom of the printing unit.
1
1
1
1
1
Remove the screw with a screwdriver or a coin.
2
2
2
2
2
Fix the removed screw to the hole on the rear panel to keep.
Keep the removed screw by setting it to the hole on the rear panel. This screw is
required when transporting this unit.
Fixed screw
SCREW
1 2 3 4 5 6 7 8
AC LINE
1 2 3 4 5 6 7 8
DIRECT SNAP
ACK
ON PARALLEL
OFF SCSI
ON
OFF
PARALLEL
ID No.
SCSI
Storing position