Philips Magnavox MRV700VR - Manual (Page 68)

68 VCR Status Displays
You may access VCR status displays that show the current videotape infor-
mation.
● Before you begin, make sure the Recorder is in VCR mode. Press VCR so
the VCR light appears on the front of the Recorder.
1 Press DISPLAY to access or remove the VCR status display.
• When you turn on the
Recorder in VCR mode, the dis-
play appears for five seconds.
• You cannot access a videotape
status display when viewing a
still picture, during slow motion,
or during forward and reverse
searching.
• Channel numbers appear on
the TV screen only for a few
seconds each time you change
TV channels in VCR mode
when the status display is off.
Helpful Hint
002
Stereo
SP 0 : 00 : 00
Videotape counter
Current TV channel
Audio available on
current TV channel
(Stereo or SAP)
Current videotape speed
indicates videotape play is stopped
indicates play
indicates recording
1
E9490UD_EN.qx3 04.8.3 11:55 AM Page 68