Philips Magnavox MRV700VR - Manual (Page 21)

Quick Disc Playback 21
1 Press STANDBY-ON y y to turn on the Recorder.
Turn on your TV. Set it to the correct Video In channel. See
pages 9-16.
2 Press the DVD button on the remote control so the DVD
light appears on the front of the Recorder.
You should see the
DVD background picture on the TV screen (if no Disc is in the
Recorder).
3 Press OPEN/CLOSE/EJECT A to open the disc tray.
Load your Disc in the tray, with the label facing up and the shiny
side facing down. If the Disc (DVD) is two-sided, make sure the label
of the side you want to play is facing up.
4 Press OPEN/CLOSE/EJECT A again to close the tray.
“Reading” will show on the display panel.The Recorder may read a
Disc for several seconds.
5 Press PLAY B to start playback.
• If you are playing a DVD, a Disc menu may appear. If the Title or
Chapter selections are numbered, press a Number button to select
an item. Or, press K
K , L L , s s , or B B to select an item, then press OK.
Continue until you start playing the Disc. Or, follow the instruc-
tions in the DVD Disc menu.
• If you are playing a DVD+RW/DVD+R, the Index Picture Screen
will appear. See page 34. Press K or L to select the Title you want
to play, then press OK. If the Disc is blank, the display will show
“EMPTY DISC.”
6 To stop play at any time, press STOP C .
If Auto resume is On, DVD play will resume at the same point the
next time you play the DVD.To play the DVD from its beginning,
restart play from the DVD’s Disc menu.
If Auto resume is Off, Resume
will appear in the top left cor-
ner when you play the DVD later.While Resume appears,
press PLAY B to resume play from the point at which you last
stopped it. Otherwise, play will start at the beginning of the DVD.
Resume
will disappear after about 15 seconds.
Auto resume is On when you purchase the Recorder. However, you
can turn it On or Off. See page 56.
• If the Disc is Locked by Access
Control, you must enter the four-
digit code or unlock the Disc.
See pages 57-61.
• DVDs have a region code.Your
Recorder will not play Discs that
have a region code other than 1
(one)or ALL. See page seven.
• Auto resume does not affect
Audio CDs. If you restart play of
an Audio CD, play starts at the
beginning of the Audio CD.
Helpful Hints
POWE R ON/O FF
LABEL
1 3-4
2
6
5
E9490UD_EN.qx3 04.8.3 11:55 AM Page 21