Philips Magnavox MDV560VR - Manual

VCR IN
LINE 1
DVD/VCR
OUT
AUDIO
OUT
AUDIO AUDIO
VIDEO VIDEO COAXIAL
DVD EXCLUSIVE OUT
DVD/VCR
OUT
ANT IN
RF. OUT DVD EXCLUSIVE OUT
REAR OF TV
(EXAMPLE ONLY)
ANTENNA IN
4
IN
OUT
RF COAXIAL CABLE
CABLE
TV SIGNAL
ANTENNA or
CABLE TV SIGNAL
CABLE BOX
OR
2
3
1
Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
2
If you do not have a Cable Box, simply connect your Antenna or Cable TV signal directly to the ANT-IN jack
on the rear of the DVD/VCR.
If you do have a Cable Box (or Satellite Receiver), first connect the Cable TV (or Satellite) signal to the IN
jack on the Cable Box/Satellite Receiver. Then, use an RF coaxial cable (like the one supplied) to connect the
OUT jack of the Cable Box/Satellite Receiver to the ANT-IN jack on the DVD/VCR.
3
Connect the supplied black RF coaxial cable to the DVD/VCR’s RF-OUT jack and to your TV’s ANTENNA IN
jack. The TV’s ANTENNA IN jack could be labelled 75-ohm, TV IN, or RF IN. Check your TV manual for details.
4
Plug the power cords of the DVD/VCR and the TV into an active power outlet.
5
Turn on the TV power. Set the TV to channel 3. (If you cannot use channel 3 at your TV, you can use channel 4
instead. However, you must set the DVD/VCR’s RF output channel to 4. See the accompanying DVD/VCR owner’s
manual for details.)
6
Press the STANDBY 2 button on the DVD/VCR or the POWER 2 button on its remote to turn on the
DVD/VCR. The first time you turn on the DVD/VCR, you should set up your TV channels at the VCR. See
the other side of this Quick-Use Guide for details.
MDV560VR
There are many ways to connect your new DVD/VCR to your Television and other equipment.This Quick-Use
Guide shows the easiest, most common connection between the DVD/VCR and a TV.
Higher quality connections are explained in the owner’s manual and will provide better sound or picture if your
TV and/or audio system is compatible.
8239 300 31711