McIntosh MA6600 User Manual
Page 23
23
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are
attached to the bottom of the equipment. Two #10 x 2-1/2
inch screws and washers must be used to fasten the unit
securely to the bottom pad and wood skid. This will ensure
the proper equipment location on the bottom pad. Failure
to do this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please
call or write Customer Service Department of McIntosh
Laboratory. Refer to page 3. Please see the Part List for the
correct part numbers.
Packing Instructions
Quantity Part Number Description
1
033888
Shipping carton
4
033887
End Cap
1
033697
Inner carton
1
033725
Top pad
1
034301
Bottom pad
1
033699
Wood skid
2
017218
Plastic foot (spacer)
2
401204
#10 x 2-1/2 inch wood screw
2
404033
#10 flat washer 1-3/4 inch
4
017937
Plastic foot
4
400159
#10-32 x 3/4 machine screw
4
404080
#10 flat washer