McIntosh MA6600 - Manual (Page 10)

10
Remote Control Push-Buttons
Press to Power the
MA6600 ON or OFF
Selects one of the eight
available Audio Sources
Selects a Disc Player, Music Server
or Tape Recorder Function and also
performs various functions on a
variety of McIntosh Components
Use to select tuner presets, disc
tracks or any numbered operation
Mutes the audio
Adjusts the volume level up or down
Selects On Screen Functions on a
variety of McIntosh Components
Selects AM Tuner Operating Func-
tions and Disc Selection on certain
McIntosh Disc Players
Selects FM Tuner Operating Func-
tions and Track Selection on certain
McIntosh CD Players
Press to change bands on the op-
tional tuner module. Press to review
Tuner Station Presets with an exter-
nal McIntosh Tuner connected and
select certain functions on a variety
of McIntosh Components
Press MODE to switch between
Stereo and Mono Modes
Turns AC Power ON or OFF to
certain McIntosh Components when
connected via the Data Port and any
McIntosh Components connected to
the ACC Power Control Jack
Note: Push-buttons whose function is not identified above
are for use with other McIntosh Products.
Press to Power ON
the MA6600
Press to Power OFF
the MA6600
LED illuminates during the time a re-
mote command is sent to the MA6600
Switches OFF the entire
MA6600 System
Selects the FF (Fast Forward) or
REWind Mode on a Disc Player,
Music Server or Tape Recorder;
seek stations Up or Down the
AM/FM Dial
Press TRIM and then the LEVEL
Push-buttons to select and adjust
various functions
Selects Functions as a “shift” key
when used with the AM or FM push-
buttons to select Output 1 or 2