Memorex MLT2022 - Manual (Page 29)

SETTING V-CHIP
28
V-Chip enables parents to prevent their children from watching inappropriate material on TV. V-Chip reads the ratings for
programming (except for news, sports, unedited movies on premium cable and Emergency System signals), then denies
access to programming if the program’s rating meets the limitations you select. In this case, the program will be blocked.
Make sure the main power switch is on as shown on page
14, then press the POWER button 1 to turn on the TV; the
POWER indicator will light green. Press the TV/VIDEO
button 2 repeatedly to select the TV mode. Press the
ENTER/MENU button 3; the Video Menu screen will
appear. Press the CHANNEL UP 4 or DOWN 5 button to
select TV SETUP, then press the ENTER/MENU button 3
to select it.
1
Press the CHANNEL/Navigation UP 1 or DOWN 2 button
until V-CHIP is selected, then press the ENTER/MENU
button 3 to select it. Using the Direct Channel Selection
buttons (0-9) ❹, enter the password (“3308” is the preset
password if you have not changed it). This password can
be changed to consist of different numbers (i.e. 1467,
3732) after the original password is entered. See page 31to
change the password.
2
Once in the V-CHIP MENU, press the
CHANNEL/Navigation UP 1 or DOWN 2 button until V-
CHIP is selected, then press the VOLUME UP button 3 to
turn the V-Chip ON. Then change the settings as per the
next two pages. Press the VOLUME UP button 3 again to
turn the V-Chip OFF.
V-CHIP SET-UP
3