Memorex MLT2022 - Manual (Page 15)

14
SETTING THE MENU
Make sure the main power switch is on as shown above,
then press the POWER button 1 to turn on the TV; the
POWER indicator will light green. Press the ENTER/MENU
button 2; the Video Menu screen will appear.
2
1
Press the ENTER/MENU button to select the Main Display
option.
NOTE: If no buttons are pressed for 10 seconds, the
menu will disappear automatically.
Press the VOLUME UP/Navigation Right 1 or VOLUME
DOWN/Navigation Left 2 button to select the desired Video
mode (the jacks that the external unit you want to view is
connected to): TV, AV, SV, YPbPr or PC.
3
Press the FREEZE/EXIT MENU button once when finished
or wait 2 seconds to exit the menus.
4
2 1
SETTING THE VIDEO
Press the Main POWER switch to the On (I) position to turn
the power on and enter the Standby mode; the POWER
indicator will light red.
1
Press the POWER button to turn on the TV; the POWER
indicator will light green.
2
TURNING THE MAIN POWER ON
NOTES:
• You can also directly press the TV/Video button (On the remote) to select the desired video mode.