Vcr connections (continued) – Memorex MLT2022 User Manual
Page 12
11
CONNECTION USING S-VIDEO CABLE:
Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable. (CABLES NOT
INCLUDED.)
VCR CONNECTIONS (CONTINUED)
1. Connect the cable, satellite or incoming
antenna to the ANT jack on the rear of the
VCR.
2. Connect the left and right audio cable from
the VCR’s Audio OUT jacks to the TV’s
audio left and right IN jacks.
3. Connect the VCR’s S-VIDEO OUT jack to
the TV’s S-VIDEO IN jack.
4. Press the TV/VIDEO button until SV
appears on the TV screen and press PLAY
on the VCR to watch a tape.