Setting the menu (continued), Audio setup (continued) – Memorex MLT2022 User Manual

Page 20

SETTING THE MENU (CONTINUED)

AUDIO SETUP (CONTINUED)

Press the CHANNEL/Navigation UP 1 or DOWN 2 button

until SOUND THEME is selected. Set the desired sound

theme (USER, POP, CLASSIC, VOICE, JAZZ, FLAT) using

the VOLUME UP/Navigation Right 3 or VOLUME

DOWN/Navigation Left 4 button.

User EQ

Mono

Press the CHANNEL/Navigation UP 1 or DOWN 2 button

until SOURCE is selected. Set the desired audio source

using the VOLUME UP/Navigation Right 3 or VOLUME

DOWN/Navigation Left 4 button.

NOTE: You can only set the SOURCE during the Picture in

Picture is activating. This function is for select between

Main - PC(VGA) audio or SUB-window's audio output.

User EQ

Mono

Press the CHANNEL/Navigation UP 1 or DOWN 2 button until MTS is selected. Set the desired MTS sound setting

(STEREO, MONO, SAP) using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button.

NOTES:

• MTS is for TV mode only; you can only set for the MTS while in the TV mode.

• MTS can support STEREO (First Audio program) and SAP (Second Audio Program).

• If the TV channel is broadcasting in stereo and the reception is strong enough, “MONO” will change to “STEREO”

automatically. You cannot select between “MONO” and “STEREO” in MTS setting.

User EQ

Mono

TO EXIT THE MENU, press the CHANNEL UP or DOWN button until RETURN is selected, then press the ENTER/MENU

button to select another menu option. You can also press the FREEZE/EXIT MENU button to exit the menus completely at

any time.