Memorex MLT2022 - Manual (Page 14)

13
DVD CONNECTIONS (CONTINUED)
CONNECTION USING COMPONENT CABLES:
Follow the instructions below to connect a DVD player to your television using the Cr, Cb, Y jacks.
(CABLES NOT INCLUDED.)
COMPUTER CONNECTION
Follow the instructions below to connect a computer to your television/monitor. (CABLES NOT INCLUDED.)
1. Connect the left and right audio cable from
the DVD’s Audio OUT jacks to the TV’s
audio left and right COMPONENT IN jacks.
2. Connect the component cables (not
included) from the DVD's Pr/Cr, Pb/Cb, Y
OUT jacks to the TVs Component IN
(Pr/Cr, Pb/Cb, Y) jacks.
3. Press the TV/VIDEO button until YPbPr
appears on the TV screen and press PLAY
on the DVD to watch a DVD.
NOTE: Connecting the DVD player to the TV
using the component cables will provide the
highest quality picture. Connecting using an S-
video cable will provide the next highest
quality picture, followed by standard
Audio/Video cable connection.
1. Power off the TV and turn off your
computer (PC).
2. Connect the audio cable (not included)
from the computer’s Audio OUT jack to the
TV’s VGA AUDIO IN jacks.
3. Connect a VGA cable from the computer’s
VGA OUT jack to the TV’s VGA IN jack.
4. Turn on the TV and press the TV/VIDEO
button until PC appears on the TV screen.
5. Turn on your computer and the computer
screen will appear.
NOTE:
1. You must follow the above steps when you
connect between the computer and the
television for the first time, otherwise, the
computer screen may not appear.
2. Refer to the computer’s owner’s manual for
instructions.