Tv operation (continued) – Memorex MLT2022 User Manual

Page 26

TV OPERATION (CONTINUED)

MUTE

CHANNEL RETURN

Repeatedly press this button to cycle through the device(s)

connected to the INPUT jacks (TV/CATV, AV, SV (S-Video),

YPbPr and PC).

NOTE:

•

For PC mode, if “PC No Signal” appears on the

screen, please refer to “COMPUTER CONNECTION”

(see page 13).

TV/VIDEO

Press to select one of the following sound modes:

STEREO: Select for channels that are broadcasting in stereo.

MONO: Select for channels broadcasting in mono or if you are

having difficulty receiving a stereo signal.

SAP (Second Audio Program): Select to listen to a Separate

Audio Program which is usually a foreign language translation.

NOTES:

• MTS is for TV mode only; you can only set for the MTS while

in the TV mode.

• MTS can support STEREO (First Audio program) and SAP

(Second Audio Program).

• If the TV channel is broadcasting in stereo and the reception is

strong enough, “MONO” will change to “STEREO”

automatically. You cannot select between “MONO” and

“STEREO” in MTS setting.

MTS

Repeatedly press the EQ button to select the desired EQ

setting ( USER, POP, CLASSIC, VOICE, JAZZ, FLAT).

Wait 10 seconds and the text will disappear.

Press the SLEEP button to set the sleep time between 5

and 120 minutes (i.e. Sleep OFF–the sleep timer will be off,

Sleep 5–the unit will automatically turn off after 5 minutes,

Sleep 15–the unit will automatically turn off after 15

minutes, etc.).

SLEEP TIMER

Press the MUTE button to turn off the sound. The TV’s

sound will be silenced and “MUTE” will appear on the

screen. The sound can be turned back on by pressing this

button again; “MUTE” will disappear from the screen.

Press the CHRTN button to go back to the previous

channel selected. Press the CHRTN button again to return

to the channel you were watching.