Motorola DVR530 - Manual (Page 30)

30
After resuming playback you will be viewing a delayed recording of the program you
paused, and the timer will display the time difference between the recording and the live
broadcast. While in this delayed mode, you may pause again, fast forward, fast reverse,
skip-forward or skip-backward until you return to live programming. You can return to the
live broadcast either by advancing the recording until it “catches up” to the live program, or
by pressing the stop button on the remote control.
You may view the IPG, Options Menu and DVR List while a live program is paused, but tuning
to a different channel, playing a previously recorded program or putting the DVR530 into
standby mode will erase the delayed recording and you will be unable to resume your
paused program.
‘Instant Replay’
While viewing any program, use the fast reverse or skip-backward buttons on the
remote control to reverse to any point you have viewed within the past 90 minutes or since
you tuned to the current channel. It is not possible to reverse to programming you viewed on
a previous channel. To return to live programming after reversing, press the stop button on
the remote control or advance the playback (using the Skip-Forward or Fast Forward
controls) until the playback “catches up” to the live programming.
TIP: You may use the Pause and Replay features together: If you reverse a live program
after pausing it, you will be able to reverse to the moment when you last tuned to that
channel, not only to the moment when the program was paused.