MITSUBISHI ELECTRIC LT-46231 - Manual (Page 90)

90 Chapter 7. Using the TV with a Personal Computer
Computer with VGA 15-Pin Monitor Output
(Analog Video)
Required: 15-pin computer VGA-to-DVI-A/VGA-to-DVI-D
cable or a VGA computer cable and a DVI/VGA adapter,
stereo audio cable.
If the computer’s audio output is a single mini jack, a mini
audio-to-RCA-male “Y” adapter cable is also required.
IMPORTANT
To use this connection, you must first select the
Analog setting in the PC DVI box of the NetCommand
menu. See the “Setup” section for more.
1. Connect the computer’s PC MONITOR OUTPUT
to PC-DVI on the TV back panel. Use either a VGA-
to-DVI monitor cable or a VGA computer cable with a
VGA/DVI adapter.
2. Connect the left (white) and right (red) audio cables
from the computer’s analog audio ouput to PC-DVI
AUDIO on the TV back panel.
- K - K
����������
����
����� ��������� ����������
������������
��
��
������������������������
������������������
��
���������������
��
����������������
Figure 4. Connecting a computer with a VGA 15-pin monitor
output.
Connecting a Computer to the TV,
continued