MITSUBISHI ELECTRIC LT-46231 - Manual (Page 51)

Chapter 4. TV Operation and Features 51
23
29
10
1
2
3
4
7
8
9
25 24
27 28
26
17
18
11
12
13
14
15
5
6
16
19
20
22
21
Figure 1. Full Size Remote Control
Sleep Timer
Setting the Sleep Timer
1. Press
SLEEP on the remote control.
2. Press SLEEP additional times to increase the time in 30-
minute increments up to the maximum of 120 minutes.
3. Press EXIT or wait five seconds without pressing any
buttons for the message to disappear.
4. Press SLEEP to view the time remaining before the sleep
timer turns off the TV.
Cancelling the Sleep Timer
1. Press
SLEEP to display the on-screen message.
2. Press SLEEP repeatedly until OFF is displayed.
Note: After five seconds of inactivity, the message box
will disappear.
Remote Control, continued
Resetting the Remote Control
(Full Size Remote Control Only)
If the slide switch is set to
TV and the TV does not respond
properly, do the following to reset the remote control.
1. Press and hold POWER for several seconds until the
button blinks twice and goes off.
2. Release the POWER button.
3. Press keys 0 0 9 3 5 . The POWER button will blink twice
when you finish entering the code. While entering the
code, pause for a moment between each key press to
ensure it is recognized.
Low Battery Indicator
(Full Size Remote Control Only)
If the
POWER button blinks five times after you have pressed
any button, the remote control batteries are low and should
be replaced.
5
12
15
16
22
21
7
9
10
8
17
18
Figure 2. Small Size Remote Control
(Supports TV and NetCommand functions only)