Graco Inc. 223660 - Manual (Page 20)

20 307-730
TECHNICAL DATA
Maximum Operating Pressure 250 psi (17.5 bar) . . . . .
Power Requirements 120 V AC, 60 Hz, . . . . . . . . . . . . .
1 Phase, 1.0 Amp
Pump Output 1 gallon (3.8 liter) in 5 minutes . . . . . . . . .
Power Supply Cord No. 16 AWG, 3 wire, . . . . . . . . . . . .
6’ (1.7 m) long
Wetted Parts Aluminum, Brass, Vitonr, . . . . . . . . . . . . .
Delrinr, Polyurethane, Neoprene,
Tungsten Carbide, Stainless Steel, Nylon, Plated
Steel,
Buna–N, Polyester, Polyvinyl Chloride
Weight 13.5 lb (6.1 Kg) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vitonr and r are registered trademarks of the
DuPont Company.
GRACO PHONE NUMBERS
TO PLACE AN ORDER, contact your Graco distribu-
tor, or call this number to identify the distributor clos-
est to you: 1–800–328–0211 Toll Free
FOR TECHNICAL ASSISTANCE, service repair in-
formation or assistance regarding the application of
Graco equipment:
1–800–543–0339 Toll Free
The CSA Listed Model, 220–345, has been obsoleted. A Basic
System, Model 223–660, has been added.
MANUAL CHANGE SUMMARY
Listed below by the assembly changed are OLD, NEW, ADDED
and DELETED parts.
Assembly
Changed
Part
Status
Ref
No. Part No. Name
218–938
System
Old
New
2a
2a
218–978
222–349
Outlet Fitting
Outlet Fitting
Old
New
15
15
108–225
101–864
Capscrew
Capscrew
Old
New
30
30
218–975
181–800
Motor
Motor
Old
New
New
63
63
63a
218–775
224–414
166–969
Extension
Extension
Gasket
Old
New
67
67
102–513
108–461
Fuse
Fuse
Old
New
70
96
181–184
181–787
Label
Label
Old
New
82
82
103–584
103–854
Screw
Screw
Add 88 220–231 Flush Kit
Add 89 107–591 Roller Cover
Old
New
59
93
167–703
187–113
Nipple
Nipple
Old
New
61
94
108–227
187–082
Nipple
Nipple
THE GRACO WARRANTY AND DISCLAIMERS
WARRANTY
Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date
of sale by an authorized Graco distributor to the original purchaser for use. As purchaser’s sole remedy for breach of this warranty,
Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment proven defective. This war-
ranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for, any malfunction, damage or wear caused by faulty installation, misap-
plication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non–Graco
component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility with Graco equipment of
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for
verification of the claim. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment
will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material
or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor and transportation.
DISCLAIMERS AND LIMITATIONS
THE TERMS OF THIS WARRANTY CONSTITUTE PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND ARE IN LIEU OF ANY OTHER WAR-
RANTIES (EXPRESS OR IMPLIED), INCLUDING WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PUR-
POSE, AND OF ANY NON–CONTRACTUAL LIABILITIES, INCLUDING PRODUCT LIABILITIES, BASED ON NEGLIGENCE OR STRICT LIABILITY.
EVERY FORM OF LIABILITY FOR DIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS IS EXPRESSLY EXCLUDED AND DENIED. IN
NO CASE SHALL GRACO’S LIABILITY EXCEED THE AMOUNT OF THE PURCHASE PRICE. ANY ACTION FOR BREACH OF WARRANTY MUST
BE BROUGHT WITHIN TWO (2) YEARS OF THE DATE OF SALE.
EQUIPMENT NOT COVERED BY GRACO WARRANTY
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, WITH RESPECT TO ACCESSORIES, EQUIPMENT, MATERIALS, OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO.
These items sold, but not manufactured by Graco (such as electric motor, switches, hose, etc.) are subject to the warranty, if any, of
their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.
Factory Branches: Atlanta, Chicago, Dallas, Detroit, Los Angeles, West Caldwell (N.J.)
Subsidiary and Affiliate Companies: Canada; England; Korea; Switzerland; France; Germany; Hong Kong; Japan
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
PRINTED IN U.S.A. 307–730 3–85 Revised 9–91
PTFE PTFE PTFE