Grizzly FOOT SHEAR T23036 - Manual (Page 20)

-18-
t23036 37" Foot Shear
SEcTiON 4: AccESSORiES
ACCeSSorieS
Figure 20. g5618 deburring tool.
g5618—Deburring Tool with two blades
g5619—Extra Aluminum blades
g5620—Extra brass and cast iron blade
the quickest tool for smoothing freshly sheared
metal edges. Comes with two blades, one for
steel and aluminum and one for brass and cast
iron.
H5614—Wire gauge uS Standard
Calibrated for sheet metal sized from 0 to 30
gauge. the front is marked with gauge sizes, the
back is marked with actual inch measurements.
Figure 22. h5614 Wire gauge.
H5958—Sheet Metal pliers
For bending and forming sheet metal. Jaws are
3
1 ⁄
2
" wide. rubber grips. overall length is 8". ideal
for hVAC installers.
Figure 23. Model h5958 Sheet Metal pliers.
Some aftermarket accessories can be
installed on this machine that could cause
it to function improperly, increasing the risk
of serious personal injury. To minimize this
risk, only install accessories recommended
for this machine by grizzly.
NOTICE
Refer to the newest copy of the grizzly
catalog for other accessories available for
this machine.