Grizzly FOOT SHEAR T23036 - Manual (Page 11)

t23036 37" Foot Shear
-9-
inventory
the following is a description of the main compo-
nents shipped with your machine. lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
inventory: (Figure 2) Qty
A. Foot Shear (not Shown) ............................. 1
b. pedal Assembly .......................................... 1
c. hex Bolts M14-2 x 50 (pedal Assembly) .... 2
D. hex nuts M14-2 (pedal Assembly)............. 2
E. Bevel gauge (w/hardware) ........................ 1
F. rear extension Arms
w/Adjustable Stops ..................................... 2
g. Front extension Arms ................................. 2
H. rear Stop (w/hardware) ............................. 1
i. Front Stop (w/hardware) ............................ 1
Figure 2. loose parts inventory.
B
C
d
e
F
g
h
i
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
SuFFOcATiON HAzARD!
immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.