Grizzly FOOT SHEAR T23036 - Manual (Page 13)

t23036 37" Foot Shear
-11-
Moving & placement
the Model t23036 is a heavy machine. A forklift
or other lifting device will be needed to lift the
shear off of the pallet. place lifting straps under
the table and connect them to the forklift forks.
have a helper nearby to assist and stabilize the
shear while you lift it, as shown in
Figure 5.
the Model t23036 must be mounted to the floor
to avoid accidental tipping during use. Because
floor materials vary, floor mounting hardware is
not included. Whichever option you choose, it is
necessary to level your machine with a precision
level.
lag shield anchors with lag bolts and anchor
studs (
Figure 6) are two popular methods for
anchoring an object to a concrete floor. We sug-
gest you research the many options and methods
for mounting your machine and choose the best
that fits your specific application.
Mounting to Shop
Floor
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move your machine.
Figure 6. typical fasteners for mounting to
concrete floors.
Figure 5. Lifting the foot shear.