beautypg.com

Battery safety burn hazards, Explosion hazards, Component damage hazards – Genie Z34N-2100 Z-34 User Manual

Page 9: Electrocution hazards, Tip-over hazard, Lifting hazard

background image

Part No. 43654

Genie Z-34/22 & Genie Z-34/22N

7

Operator's Manual

Second Edition • Ninth Printing

SAFETY RULES

Battery Safety

Burn Hazards

Batteries contain acid. Always wear protective
clothing and eyewear when working with batteries.

Avoid spilling or contacting battery acid. Neutralize
battery acid spills with baking soda and water.

The battery pack must remain in upright position.

Do not expose the batteries or the charger to water
or rain.

Explosion Hazards

Keep sparks, flames and
lighted tobacco away from
batteries. Batteries emit an
explosive gas.

The battery pack cover
must remain off during the
entire charging cycle.

Do not contact the battery terminals or the cable
clamps with tools that may cause sparks.

Component Damage Hazards

Do not use any battery charger greater than 48V to
charge the batteries.

Both battery packs must be charged together.

Disconnect the battery pack plug before removing
the battery pack.

Electrocution Hazards

Connect the battery charger to a
grounded, AC 3-wire electrical
outlet only.

Inspect daily for damaged cord,
cables and wires. Replace
damaged items before
operating.

Avoid electrical shock from contact with battery
terminals. Remove all rings, watches and other
jewelry.

Tip-over Hazard

Do not use batteries that weigh less than the
original equipment. Batteries are used as
counterweight and are critical to machine stability.
Each battery must weigh 88 lbs / 40 kg. Each
battery box including batteries must weigh a
minimum of 452 lbs / 205 kg.

Lifting Hazard

Use a forklift to remove or install the battery packs.

This manual is related to the following products: