Genie Z34N-2100 Z-34 - Manual (Page 24)

22 Genie Z-34/22 & Genie Z-34/22N Part No. 43654
Operator's Manual Second Edition • Ninth Printing
Operation from Platform
1 Turn the key switch to platform control.
2 Pull out both ground and platform red
Emergency Stop buttons to the on position.
3 Be sure that both battery packs are connected
before operating the machine.
To Position Platform
1 Set the boom function speed controller to the
desired speed.
Note: Drive and steer functions are not affected by
the boom function speed controller.
2 Move the lift/drive select switch to the lift
position (if equipped).
3 Press down the foot switch.
4 Move the appropriate toggle switch according to
the markings on the control panel.
Machines equipped with Platform Level Control
Disable Function: The platform level toggle switch
will not operate when the boom is raised past the
drive speed limit switch.
To Steer
1 Move the lift/drive select switch to the drive
position (if equipped).
2 Press down the foot switch.
3 Turn the steer wheels with the thumb rocker
switch located on top of the drive control
handle.
Use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the wheels will turn.
To Drive
1 Move the lift/drive select switch to the drive
position (if equipped).
2 Press down the foot switch.
3 Increase speed: Slowly move the drive control
handle off center.
Decrease speed: Slowly move the drive control
handle toward center.
Stop: Return the drive control handle to center or
release the foot switch.
Use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the machine will travel.
The travel alarm will sound when the drive controller
is moved off center.
Note: When the turntable is rotated so the boom is
past the non-steer tires, the machine may move in
the opposite direction that the drive and steer
controls are moved.
Machine travel speed is restricted when the booms
are raised or extended.
Battery condition will affect the ability of the
machine to climb a slope.
OPERATING INSTRUCTIONS