GE TRIVECTION JT980 - Manual (Page 11)

11
Installation Instructions
THREE-CONDUCTOR BRANCH
CIRCUIT CONNECTION
When connecting to a three-conductor branch
circuit, if local codes permit:
Connect the bare oven ground conductor
with the crimped neutral (white) lead to
the branch circuit neutral (white or gray
in color), using a wire nut.
Connect the oven red lead to the branch
circuit red lead in accordance with local
codes, using a wire nut.
Connect the oven black lead to the
branch circuit black lead in accordance
with local codes, using a wire nut. If the
residence red, black or white leads are
aluminum conductors, see WARNING
under ATTENTION INSTALLER.
Install Junction Box Cover. D
C
B
A
8
Ground and
Neutral Wires
Junction Box Cover