Garmin 110 User Manual

Page 29

Rino

110 Owner’s Manual

NIT

PERATION

AGE

To view a Contact from the Map Page:

1. Highlight the desired Contact icon using the

Thumb Stick. As you highlight the contact on the

Contact Bar, the Map Page centers the map on

that contact and displays its name, direction, and

distance near the top of the screen.

2. Press the

Thumb Stick In to view the details of

the Contact.

3. Press the

Thumb Stick to the Left or Right to re-

center the map on your current position.

The scale can be changed from 20 feet to 500 miles. A

lower zoom scale displays less area but more map detail,

while a higher zoom scale shows you a larger area with

less map detail. The

Thumb Stick and Zoom (Z) key on

the front right of the unit allow you to zoom in and out on

the map. Press the Zoom (Z) key from any page (other

than the Map Page) to open the Map Page.

To change scales on the Map Page:

1. Press the

Zoom (Z) key to open the Zoom

window.

2. Use the

Thumb Stick to change the map scale to

show more map area with less detail or less map

area with more detail.

Press and hold Up or Down on the

Thumb Stick

to zoom the map scale rapidly. Press the

Thumb

Stick Left, Right, or In to close the Zoom window.

The map scale in the lower left hand side of the display

is shown in the units of measurement selected in the

Units ﬁeld of the Unit Setup Page (accessed through the

Main Menu Setup Page). If you zoom in so far that the

resolution of the map data is exceeded and the appearance

of the map is no longer accurate, the word, “overzoom”

displays just below the map scale.

Press Up to Zoom Out;

press Down to Zoom In

This manual is related to the following products:

Rino 110