beautypg.com

Garmin 110 User Manual

Page 17

background image

Rino

®

110 Owner’s Manual

11

U

NIT

O

PERATION

>

R

ADIO

P

AGE

Setting the squelch code to 0 (squelch code off) allows

you to hear all activity on the selected channel, but

you must be set to the same squelch code as the other

person(s) to transmit back. See the “Appendix” for a table

listing all of the 38 Squelch Codes and their frequencies.
As you change the main channels, the Rino 110

remembers the last channel/squelch code combination

that you were using. For example, you may set the unit

channel to 5 and squelch code to 21, then change the

main channel to 8 and squelch code to 2. If you change

the channel back to 5, the squelch code changes back to

its previous setting of 21. See the “Appendix” for more

information on FRS/GMRS and its operational aspects.

To change the Channel and/or Squelch Code:

1. Using the

Thumb Stick, highlight the Channel

or

Code field and then press In to show a list of

available channels/squelch codes.

2. Scroll through the selections and highlight the

desired selection. Because not all the items fit in

the window, a slider bar on the right side indicates

your current position in the list.

3. Once you have highlighted the desired selection,

press the

Thumb Stick In.

Choose from 38 squelch codes. Setting the unit

to zero will allow you to hear all transmissions

on that channel, but you must be on the same

squelch code to communicate back.

This manual is related to the following products: