beautypg.com

Setup tones – Garmin 110 User Manual

Page 21

background image

Rino

®

110 Owner’s Manual

15

U

NIT

O

PERATION

>

R

ADIO

P

AGE

Headset Type—allows you to choose which accessory

headset or microphone you are using with the unit, or

have the unit automatically detect the type. If you use

more than one type of headset or microphone, you need

to set the unit to Ask When Detected before changing

accessories.

NOTE: If the headset has a PTT (Push to Talk)

button, it must be pressed for the unit to detect the

headset.

Microphone Sensitivity—allows you to set the

sensitivity of the internal microphone and the sensitivity

of a headset microphone.

Setup Tones

Call Tone—when the Call key is pressed, an attention

tone is transmitted. This option allows you to choose one

of ten tones.

Roger Tone—when the Talk key is released, a tone is

sent to signify the end of the transmission. This option

allows you to choose one of four tones or set the tone to

Off.
Ring Tone—when an incoming transmission is received,

an attention tone sounds. This option allows you to

choose one of ten tones or set the tone to Off. The Ring

Tone will not sound again until there has been 45 seconds

of radio inactivity.

Setup Tones Page

This manual is related to the following products: