beautypg.com

Setup scanlist, Turn radio/gps on/off, Informational picture – Garmin 110 User Manual

Page 22: Gps status, Radio transmission status

background image

16

Rino

®

110 Owner’s Manual

U

NIT

O

PERATION

>

R

ADIO

P

AGE

Setup Scanlist

Refer to “Scanning and Monitoring” previously in this

manual for complete information about this feature and

the options in this page.

Turn Radio/GPS On/Off

Press the Thumb Stick In on either of these two options

to toggle them from on to off. For example, to turn GPS

Off, press the Thumb Stick In when Turn GPS Off is

highlighted.

Informational Picture

The Informational Picture on the bottom half of the

Radio Page features Garmin’s Mr. Mark Waypoint figure

showing current GPS and radio status, and radio actions.

As you operate the unit, the graphics change depending

on what actions you are taking and the unit settings.

GPS Status

Four satellites are shown on at the top of the picture along

with descriptive text to indicate GPS reception status.

As the unit collects satellite information, the satellite

symbols flash alternately until all four are steady to

indicate a 3D position fix. The more satellites that are

steady, the better your position fix.

Radio Transmission Status

As radio signals come in, signal wave symbols

( ) display to the left of Mark Waypoint. Fragmented

(or broken) signal symbols ( ) are shown to indicate

activity on that channel. Audio remains muted because

the incoming signal does not match the squelch code your

unit is set to.

Informational Picture showing

Mark Waypoint

This manual is related to the following products: