Gateway TM 5150 - Manual (Page 61)

Appendix A: Using the BIOS Setup Program 59
The command bar at the bottom of the screen shows the keystrokes
necessary to access help, navigate through the menus, and perform other
functions.
• F1 opens the Help screen, providing general help for using the
BIOS Setup utility.
• The up arrow and down arrow keys select items in the menu.
• Pressing S HIFT with the + or - key changes values in fields or
moves an item up or down in a list.
• F9 opens a screen that lets you return all values to their default
settings.
• E SC closes the screen you are in and returns you to the previous
screen.
• The left arrow and right arrow keys move you between the five
menus.
• E NTER either moves you to a submenu screen when a selected item
is preceded by > or activates a selected field.
• F10 opens a screen that lets you accept or disregard changes you
made and then exit the BIOS Setup utility.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
System Time:
System Date:
Floppy Disk Drive A:
Floppy Disk Drive B:
Primary Master
Secondary Master
Memory Cache:
System Memory:
System Information
Num lock:
Display Device:
Text Mode Expnasion:
Graphics Mode Expansion:
QuickBoot Mode:
Boot-time Diag. Screen:
[HH:MM:SS]
[MM/DD/YYYY]
[1.44MB/1.25 MB, 3 1/2”]
[Disabled]
(NNN MB)
(CD-ROM)
Enabled
NNN MB
[Off]
[Simultaneous]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Default
ESC Exits ←→ Select Menu Enter Select > Sub-Menu F10 Save and Exit
Note:
The Setup menu screen
shown may differ somewhat
from that shown here. If
there are differences, follow
the on-screen instructions
and helps.