Gateway TM 5150 - Manual (Page 57)

Chapter 4: Managing Power Use 55
Windows 95 and Windows NT
To modify your power management settings in Windows 95 and
Windows NT, you need to go into the BIOS program to change the power
management settings. See “Using the Power menu” on Page 61 for more
information on these settings and how to modify them.
Using Suspend mode in Windows 95 and Windows NT
Windows 95 and Windows NT use Suspend mode. When in Suspend
mode, your notebook enters a sleep state according to the power
management settings. Suspend mode causes the system to remove power
from most devices except memory.
The following table shows how to change the system modes in Windows 95
and Windows NT.
If your
notebook
is... ...and you
want to... Do the following
Off Start up Press the power button
On Suspend Click Start , Suspend
- OR -
Press
F N +F4
In Suspend
mode Resume
power Press the power button briefly
On Shut down Click Start , Shut Down , Shut down the
computer
, then click
Yes.