Genie Z-34 - Manual (Page 24)

22 Genie Z-34/22 Bi-Energy Part No. 56011
Operator's Manual First Edition • Fifth Printing
Stopping the Engine
Push in the red Emergency Stop button and turn
the key switch to the off position.
Charging the Batteries
Use the engine or the AC battery charger to
recharge the batteries.
Charging the Batteries with the Engine
Running the engine will automatically charge the
batteries. At high idle, the engine supplies enough
power for charging and for machine functions. At
low idle, machine functions will use battery power.
All lift and drive functions can be operated while
the engine is running.
The battery charge indicator will reset when the
engine has been turned off for 2-3 minutes.
Charging the batteries with the engine does not
fully charge the batteries. Periodically, use the AC
battery charger to fully charge the batteries.
Charging the Batteries with the AC Charger
Be sure the engine is not running.
Use the AC battery charger included with the
machine for overnight charging. The charger shuts
off automatically.
Periodically, use the AC battery charger to fully
charge the batteries.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Retract and lower the boom to the stowed
position.
3 Rotate the turntable so that the boom is
between the non-steer wheels.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
5 Chock the wheels.
6 Charge the batteries (if necessary).
OPERATING INSTRUCTIONS