Genie Z-34 - Manual (Page 15)

Part No. 56011 Genie Z-34/22 Bi-Energy 13
Operator's Manual First Edition • Fifth Printing
Scheduled Maintenance
Maintenance performed quarterly, annually and
every two years must be completed by a person
trained and qualified to perform maintenance on this
machine according to the procedures found in the
service manual for this machine.
Machines that have been out of service for more
than three months must receive the quarterly
inspection before they are put back into service.
Check the Tire Pressure
This procedure does not need
to be performed on machines
equipped with the foam-filled
tire option.
Bodily injury hazard. An over-
inflated tire can explode and may
cause death or serious injury.
Tip-over hazard. Do not use
temporary flat tire repair products.
To safeguard maximum stability, achieve
optimum machine handling and minimize tire
wear, it is essential to maintain proper pressure
in all air-filled tires.
1 Check each tire with an air pressure gauge and
add air as needed.
Tire specifications
Industrial tire 9-14.5 LT
100 psi (6.89 bar)
Rough terrain tire 10-16.5 NHS
45 psi (3.1 bar)
MAINTENANCE