Genie Z-34 - Manual (Page 22)

20 Genie Z-34/22 Bi-Energy Part No. 56011
Operator's Manual First Edition • Fifth Printing
OPERATING INSTRUCTIONS
Emergency Stop
Push in the red Emergency Stop button to the off
position at the ground or platform controls to stop
all machine functions and turn the engine off.
Repair any function that operates when the red
Emergency Stop button is pushed in.
Selecting and operating the ground controls will
override the platform red Emergency Stop button.
Operation from Ground
1 Turn the key switch to ground control.
2 Pull out the red Emergency Stop button to
the on position.
To Position Platform
1 Hold the function enable switch to either side.
2 Move the appropriate toggle switch according to
the markings on the control panel.
Drive and steer functions are not available from the
ground controls.
Machines equipped with Platform Level Control
Disable Function: The platform level toggle switch
will not operate when the primary boom is raised
past the drive speed limit switch.
Operation from Platform
1 Turn the key switch to platform control.
2 Pull out both ground and platform red
Emergency Stop buttons to the on position.
To Position Platform
1 Press down the foot switch.
2 Slowly move the appropriate function control
handle or toggle switch according to the
markings on the control panel.
Machines equipped with Platform Level Control
Disable Function: The platform level toggle switch
will not operate when the primary boom is raised
past the drive speed limit switch.
To Steer
1 Press down the foot switch.
2 Turn the steer wheels with the thumb rocker
switch located on top of the drive control
handle.
Use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the wheels will turn.
To Drive
1 Press down the foot switch.
2 Increase speed: Slowly move the drive control
handle off center.
Decrease speed: Slowly move the drive control
handle toward center.
Stop: Return the drive control handle to center
or release the foot switch.
Use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the machine will travel.
Machine travel speed is restricted when the booms
are raised or extended.