GIGABYTE GA-M61PME-S2P - Manual (Page 79)

Appendix - 79 -
Step 5:
After completing the settings above, click Start, point
to All Programs, point to Accessories, and then
click Sound Recorder to begin the sound recording.
* Enabling Stereo Mix
If the HD Audio Manager does not display the recording device you wish to use, refer to the steps
below. The following steps explain how to enable Stereo Mix (which may be needed when you want
to record sound from your computer).
Step 1:
Locate the Volume icon in the notification area
and right-click on this icon. Select Recording
Devices.
Step 4:
To raise the recording and playback volume for the
microphone, click the Microphone Boost icon
on the right of the Recording Volume slider and set
the Microphone Boost level.
Step 2:
On the Recording tab, right-click on an empty space
and select Show Disabled Devices.