GIGABYTE GA-M61PME-S2P - Manual (Page 26)

GA-M61PME-S2P Motherboard - 26 -
11) F_AUDIO (Front Panel Audio Header)
The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may
connect your chassis front panel audio module to this header. Make sure the wire assignments of
the module connector match the pin assignments of the motherboard header. Incorrect connection
between the module connector and the motherboard header will make the device unable to work
or even damage it.
10 9
2 1
For AC'97 Front Panel Audio:
•
The front panel audio header supports HD audio by default. If your chassis provides an
AC'97 front panel audio module, refer to the instructions on how to activate AC'97 functioninality
via the audio software in Chapter 5, "Configuring 2/4/5.1-Channel Audio."
•
Audio signals will be present on both of the front and back panel audio connections
simultaneously. If you want to mute the back panel audio (only supported when using an HD
front panel audio module), refer to Chapter 5, "Configuring 2/4/5.1-Channel Audio."
•
Some chassis provide a front panel audio module that has separated connectors on each
wire instead of a single plug. For information about connecting the front panel audio
module that has different wire assignments, please contact the chassis manufacturer.
Pin No. Definition
1 MIC
2 GND
3 MIC Power
4 NC
5 Line Out (R)
6 NC
7 NC
8 No Pin
9 Line Out (L)
10 NC
Pin No. Definition
1 MIC2_L
2 GND
3 MIC2_R
4 -ACZ_DET
5 LINE2_R
6 GND
7 FAUDIO_JD
8 No Pin
9 LINE2_L
10 GND
For HD Front Panel Audio:
12) HDA_SUR (Surround/Center Audio Header)
To enable 7.1-channel audio, connect a 5.1/7.1 surround cable to this header and configure audio
output mode via the audio software. For purchasing the optional 5.1/7.1 surround cable, please
contact the local dealer.
Pin No. Definition
1 LEF_P
2 SURR_RR
3 CEN_P
4 SURR_LL
5 CEN_JD
6 SURR_JD
7 GND
8 -SUR_DET
9 GND
10 No Pin
11 GND
12 S_SURR_JD
13 S_SURR_LL
14 S_SURR_RR
1
2
13
14