5 integrated peripherals, Serial-ata raid config, On-chip ide channel – GIGABYTE GA-M61PME-S2P User Manual
Page 39: Nv sata controller, Ide prefetch mode, 39 - bios setup
- 39 -
BIOS Setup
2-5
Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Integrated Peripherals
On-Chip IDE Channel
[Enabled]
NV SATA Controller
[Enabled]
IDE Prefetch Mode
[Enabled]
USB Memory Type
[SHADOW]
Serial-ATA RAID Config
[Press Enter]
Onboard Audio Function
[Auto]
On-Chip MAC Lan
[Auto]
Onboard LAN Boot ROM
[Disabled]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[SPP]
x
ECP Mode Use DMA
3
On-Chip USB
[V1.1+V2.0]
USB Keyboard Support
[Disabled]
USB Mouse Support
[Disabled]
Legacy USB storage detect
[Enabled]
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
Serial-ATA RAID Config
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Serial-ATA RAID Config
Item Help
Menu Level
NV SATA RAID function
[Disabled]
x
NV SATA 1 Primary RAID
Enabled
x
NV SATA 1 Secondary RAID
Enabled
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
On-Chip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
NV SATA Controller
Enables or disables the integrated SATA 3Gb/s controller. (Default: Enabled)
IDE Prefetch Mode
Enables or disbales prefetch mode for the integrated IDE controller. Enabled activates the IDE
prefetch buffer to enhance hard drive performance. (Default: Enabled)
USB Memory Type
Specifies the type of memory allocated for USB devices. Options are: SHADOW (default), Base
Memory (640K).