GIGABYTE GA-M61PME-S2P - Manual (Page 34)

GA-M61PME-S2P Motherboard - 34 -
     Standard CMOS Features
Use this menu to configure the system time and date, hard drive types, floppy disk drive types,
and the type of errors that stop the system boot, etc.
     Advanced BIOS Features
Use this menu to configure the device boot order, advanced features available on the CPU, and
the primary display adapter.
     Integrated Peripherals
Use this menu to configure all peripheral devices, such as IDE, SATA, USB, integrated audio, and
integrated LAN, etc.
     Power Management Setup
Use this menu to configure all the power-saving functions.
     PnP/PCI Configurations
Use this menu to configure the system's PCI & PnP resources.
     PC Health Status
Use this menu to see information about autodetected system/CPU temperature, system voltage
and fan speed, etc.
     Load Fail-Safe Defaults
Fail-Safe defaults are factory settings for the most stable, minimal-performance system operations.
     Load Optimized Defaults
Optimized defaults are factory settings for optimal-performance system operations.
     Set Supervisor Password
Change, set, or disable password. It allows you to restrict access to the system and BIOS Setup.
A supervisor password allows you to make changes in BIOS Setup.
     Set User Password
Change, set, or disable password. It allows you to restrict access to the system and BIOS Setup.
An user password only allows you to view the BIOS settings but not to make changes.
     Save & Exit Setup
Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup.
(Pressing can also carry out this task.)
     Exit Without Saving
Abandon all changes and the previous settings remain in effect. Pressing to the confirmation
message will exit BIOS Setup. (Pressing can also carry out this task.)