GIGABYTE GA-M61PME-S2P - Manual (Page 60)

GA-M61PME-S2P Motherboard - 60 -
Step 6:
Select Save & Exit Setup and then press to save settings to CMOS and exit BIOS Setup. The
procedure is complete after the system restarts.
Press to load BIOS defaults
Step 4:
Press and then to exit Q-Flash and reboot the system. As the system boots, you should
see the new BIOS version is present on the POST screen.
Step 5:
During the POST, press to enter BIOS Setup. Select Load Optimized Defaults and press
to load BIOS defaults. System will re-detect all peripherals devices after a BIOS update, so we
recommend that you reload BIOS defaults.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Esc: Quit
: Select Item
F8: Q-Flash F10: Save & Exit Setup
Load Optimized Defaults
 Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals
 Power Management Setup

PnP/PCI Configurations
 PC Health Status
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Load Optimized Defaults (Y/N)? Y