Grizzly G9749 - Manual (Page 13)

G9749 Variable Speed Drill Press
-11-
Wear safety glasses dur-
ing the entire setup pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Setup Safety
SECTION 3: SETUP
The following items are needed to complete the
setup process, but are not included with your
machine:
Description Qty
• Assistance .......................1 or more persons
• 1 ⁄
2
-Ton Forklift or Crane, and Operator
(for lifting/moving) ....................................... 1
• 1 ⁄
2
-Ton Lifting Straps (for lifting/moving) ..... 2
• 1 ⁄
2
-Ton Hook (for lifting/moving) .................. 1
• Safety Glasses (for each person) .............. 1
• Degreaser/Solvent (for clean-up) As needed
• Shop Rags (for clean-up) ............As needed
• Open end wrench 9 ⁄
16
" ................................ 1
Items Needed for
Setup
Floor Load
Refer to the Machine Data Sheet on Page 3 for
the weight and footprint specifications of your
machine. Some residential floors may require
additional reinforcement to support both the
machine and operator.
Placement Location
When establishing a location for your new machine,
consider existing and anticipated needs, size of
material to be processed through this machine,
and space for auxiliary stands, work tables or
other machinery. See
Figure 5 for the minimum
working clearances.
Unsupervised children and
visitors inside your shop
could cause serious per-
sonal injury to themselves.
Lock all entrances to the
shop when you are away and
DO NOT allow unsupervised
children or visitors in your
shop at any time!
Site Considerations
Figure 5. Minimum working clearances.
����
����