Graco Inc. Series E - Manual (Page 18)

18
307–760
ACCESSORIES
Must be purchased separately .
CAUTION
To avoid premature wear of the pressure switch,
never use more than 7.6 m (25 ft) of 6 mm (1/4 in.)
ID outlet hose. When longer outlet hose is needed
use 9 mm (3/8 in.) ID hose at a maximum of 30 m
(100 ft) long. Never use 6 mm (1/4 in.) ID and 9 mm
(3/8 in.) ID hose together.
Do not use lacquer or lacquer thinner in the suction
and outlet hoses supplied with this system. These
fluids quickly destroy the hose material. Use the op-
tional chemical–resistant hoses.
CHEMICAL–RESISTANT SUCTlON & OUTLET
HOSES
For use with lacquer and lacquer thinners.
205–142 Outlet Hose; Nylon; 9 mm (3/8”) ID; cpld
3/8 npsm(fbe); 7.6 m (25’);
21 bar (300psi) MAXIMUM WORKING
PRESSURE
219–095 Suction Hose; Nylon
LARGER DIAMETER OUTLET HOSE
Use this hose when using more than 7.6 m (25 ft) of outlet
hose. Not intended for use with lacquer or lacquer
thinners.
220–009 Outlet Hose; 9 mm (3/8”) ID; cpld 3/8
npsm(fbe); 15 m (50’); 1
7.5 bar (250 psi)
MAXIMUM WORKING PRESSURE
NlPPLE 108–228
Needed to couple two lengths of hose 220–009.
3/8 npsm(mbe)
ADAPTER FITTING 220–265
5000 psi (350 bar) MAXIMUM WORKING PRESSURE
Couples roller frame directly to roller valve.
3 INCH ROLLER FRAME & DlFFUSER 220–234
Same as 9 in. version but shorter. (See page 16)
Must order cover separately.
3 INCH ROLLER COVER
108–402 1/2 in. (12 mm) nap, for semi–rough to
smooth surfaces.
9 INCH ROLLER COVERS
107–590 12 mm (1/2 in.) nap, for semi–rough to
smooth surfaces
107–591 19 mm (3/4 in.) nap, for semi–rough sur-
faces
107–592 32 mm (1–1/4 in.) nap, for rough surfaces
ADJUSTABLE EXTENSION TUBES
218–775 0.45–0.9 m (18–36 in.)
218–776 0.9–1.8 m (3–6 ft)
218–777 1.8–3.7 m (6–12 ft)
218–778 2.4–4.8 m (8–16 ft)
SPRAY WAND 220–236
4050 psi (260 bar) MAXIMUM WORKING PRESSURE
Creates soft spray when used with the PT2000.
TWO ACCESSORY ADAPTER 220–232
1000 psi (70 bar) MAXIMUM WORKING PRESSURE
Adapts pump outlet of PT2000 to use two accessory
applicators simultaneously.
FLUSH ADAPTER 220–231
Allows you to use the city water supply to quickly flush
the PT2000.