Gateway 1450 - Manual (Page 50)

45
Replacing the palm rest assembly
www.gateway.com
Replacing the palm rest assembly
Tools you need to complete this task:
Screws removed during this task:
Phillips #0 screwdriver Scribe or non-marring tool
1 chrome 2 × 4 mm
(LCD cable) 4 chrome 2.5 × 6 mm
(hinges)
2 black 2.5 × 5 mm
(left hinge cover)
1 chrome 2.5 × 6 mm
(right hinge cover)
13 black 2.5 × 5 mm
(palm rest bottom) 3 black 2.5 × 5 mm
(palm rest back)
2 chrome 2.5 × 6 mm
(palm rest top)
2 black 2.5 × 5 mm
(hard drive) 2 chrome 2.5 × 3 mm
(keyboard)