Gateway 1450 - Manual (Page 33)

28
Chapter : Replacing Components in Your Gateway Solo 1450
www.gateway.com
4
Remove the LCD panel assembly from your notebook by following the
instructions in “Replacing the LCD panel assembly” on page 24.
5
Move your notebook to the side and place the LCD panel assembly
directly in front of you on the table.
6
Use a scribe or other non-marring tool to remove the six screw cover pads.
Place the pads on a clean metal or plastic area of your work table.
7
Remove the six black screws on the LCD panel assembly.
Flat pads
Rounded pads