Gateway 1450 - Manual (Page 13)

8
Chapter : Replacing Components in Your Gateway Solo 1450
www.gateway.com
Replacing the hard drive in the
hard drive kit
Tools you need to complete this task:
Screws removed during this task:
To install a new hard drive into the kit:
1
Disconnect the power cord, remove the battery, and prepare your
notebook by following the instructions in “Preparing your notebook” on
page 5.
2
Remove the hard drive kit by following the instructions in “Replacing
the hard drive kit” on page 6.
Phillips #0 screwdriver
4 chrome 3 × 3.5 mm
(hard drive) 2 black 2.5 × 5 mm
(hard drive)