Replacing the keyboard – Gateway 1450 User Manual
Page 37
32
Chapter : Replacing Components in Your Gateway Solo 1450
www.gateway.com
Replacing the keyboard
Tools you need to complete this task:
Screws removed during this task:
To remove the keyboard:
1
Disconnect the power cord, remove the battery, and prepare your
notebook by following the instructions in “Preparing your notebook” on
page 5.
2
Remove the keyboard cover by following the instructions in “Replacing
the keyboard cover” on page 19.
Phillips #0 screwdriver
Scribe or non-marring tool
2 chrome 2.5 × 3 mm
(keyboard)