Garmin 910XT - Manual (Page 46)

44 Appendix
Transmission
range
Approximately
16.4 ft. (5 m)
Heart rate Monitor Battery

wArNINg
Do not use a sharp object to remove
user-replaceable batteries.
Contact your local waste disposal
department to properly recycle the
batteries. Perchlorate Material – special
handling may apply. See www.dtsc
.ca.gov/hazardouswaste/perchlorate .
replacing the Heart rate Monitor
Battery
1 Use a small Phillips screwdriver to
remove the four screws on the back of
the module.
2 Remove the cover and battery.
3 Wait 30 seconds.
4 Insert the new battery with the positive
side facing up.
NOTE: Do not damage or lose the
O-ring gasket.
5 Replace the back cover and the four
screws.
After you replace the heart rate monitor
battery, you must pair it with the device
again ( page 22 ).
Appendix
registering Your Device
Help us better support you by completing
our online registration today.
• Go to
http://my.garmin.com .
• Keep the original sales receipt, or a
photocopy, in a safe place.